Product description:
Very high gain dual-polarized parabolic antenna (32 dBi), wide range of operation (4.9 - 6.2 GHz) and high isolation between two antenna inputs working with orthogonal polarization.The profiled and elongated flange of the main mirror of the antenna allows the reduction of side radiation so that the antenna is suitable for mounting in locations where other systems operate in the band, minimizing their impact on the link being created.Isolation of over 50 dB in a very wide operating band is ensured by the use of a bipolar transistor in the form of a square waveguide with appropriate distribution of metal bars inside the structure.This solution provides unmatched compatibility with VSWR <1.5 in a very wide bandwidth while minimizing interference losses in the radiator.The Cassegrain mirror system with modified secondary mirror provides reduction of the side lobes level and narrowing the beam of the main radiation characteristic.The antenna also has less weight and dimensions compared to competing solutions, making it much easier to mount and mimic when using high-throughput links using MIMO 2x2 or Nstreme Dual.The integrated aluminum enclosure creates the Faraday cage, protecting the inside of the electronics from electrostatic damage. Dimensions of the casing allow you to freely place inside the panels: RB 912, RB911, RB411, 433, 435, 493, Ubiquiti Rocket, etc. with the included metal spacer sleeves. Card / radio cards require pigtail with N / male connector for antenna connection.The solid handle attached to the antenna provide stability and high wind resistance. Made of acid-proof steel 2.5mm. thick. Equipped with adjusting screws and M8 adjusting screws (screw head for 13 mm flat key). Allows smooth and precise antenna adjustment:In vertical (top-down): 50 degreesIn the horizontal plane (left - right): 20 degreesIncludes 2 M10 wedges that fit on a mast with a diameter of 26 - 72 mm. The cyanide yoke made of 2.5mm galvanized cold rolled steel, 25 mm wide. Nuts of u-bolt for a flat key 17 mm.Antenna mirror (parabola) made of 1.5 mm aluminum alloy, Cassegrain headlamp made of 1 mm aluminum alloy. The mirror, reflector, radiator and antenna holder are protected from external influences.The parabolic and reflector cover is made of very durable and low-loss HIPS, UV-resistant. Thanks to this, the antenna is perfectly protected from weather conditions, which guarantees durability and constant parameters during operation.
Technical specification
| Antenna type | dual polarity, parabolic |
| Frequency range | 4,9 - 6,2 GHz |
| Gain | 5,2 - 5,7 GHz: 32 dBi4,9 - 5,2 GHz: 31 dBi5,7-6,2 GHz: 31 dBi |
| Polarization | vertical + horizontal |
| Back ratio | >40 dB |
| Separation between connectors | >50 dB |
| Vertical beam width | 4-5 ° for -3dB |
| Horizontal beam width | 4-5 ° for -3dB |
| VSWR | <1,5 for 5,0 - 5,9 GHz<1,9 for 4,9 - 5,0 GHz<1,9 for 5,9 - 6,2 GHz |
| Impedance | 50 Ohm |
| Side lobes | 5,2 - 5,7 GHz: < -20 dB4,9 - 5,2 GHz: < -17 dB5,7 - 6,2 GHz: < -17 dB |
| Connector | 2 x N/Female |
| Wind load | 56 m/s |
| The diameter of the mast / pole | 26 - 72 mm mm |
| Dimensions | 855 x 550 mm |
| Dish dimensions | ø 800 mm |
| Package dimension | 108/27/92 cm |
| Total weight | 14000 g |
| Weight with mounting | 10500 g |
| Outdoor case weight | 1700 g |
| Weight without mounting | 7700 g |
| Warranty | 36 months |