Product description:
The antenna system uses two linear opposite polarization slots H and two opposite polarization radiators V located above the inactive side walls of the polarization antenna H.Correctly selected in the design and modeling of distances between individual radiators allow omnidirectional space coverage with small waveforms and high separation for both polarizations, while the use of a professional power divider for the combination of V polarized radiators provides full symmetrical power without loss due to Additional undesirable reflections.Antenna radiators are placed under the cover of a very durable and low-damping plastic. This protects the antenna against the effects of weather conditions and ensures durability and stability of parameters during operation.The antenna is permanently integrated with a handle made of acid steel. Installation on attached two wedges 26 - 53 mm. Possible mounting with 2 steel straps (not included )
Technical specification
| Antenna type | omnidirectional |
| Frequency range | 5,47 - 5,80 GHz |
| Gain | 13 dBi |
| Polarization | vertical + horizontal |
| Back ratio | n/a dB |
| Vertical beam width | 8 ° for -3dB |
| Horizontal beam width | 360 ° for -3dB |
| VSWR | 1 : 1,5 |
| Impedance | 50 Ohm |
| Connector | 2 x N/Female |
| Wind load | 56 m/s |
| Mounting | pole mounting |
| The diameter of the mast / pole | 26 - 53 mm |
| Dimensions | 620 x dia 75 mm |
| Package dimension | 65/11/10 cm |
| Total weight | 1700 g |
| Weight with mounting | 1600 g |
| Weight without mounting | 1300 g |
| Warranty | 36 months |